Welcome to the YiPin official website! 中文 | English

Contacts

Yipin Metal (D.G.) Co., Ltd
Contact: Mr. Yang
Phone:13929268550
Fax:0769-87125183
E-mail:yjx@dgyzsp.com
Address:No.1, Fusheng Road, Tiantoujiao Village,Qiaotou town,Dongguan City, Guangdong Province, China

How to deal with compression spring deformation?
Compression spring is the most commonly used spring, compression spring after a period of time, compression spring due to the deformation of a part of the error, how to do? Don't worry, here's how to correct a pressure spring:
Actually for spiral compression spring after end face grinding, if spring free height, verticality and pitch and diameter, and so on are no deviation reach rules, tend to need correction processing.
Corrective actions are now typically manual or semi-manual. Common tools are: if the wire is more than 4 mm compression spring, we usually use more than hand lever press, split machine, punch press and other tools; If the wire is compressed to a spring less than 4 mm, we use special tools, pliers, hammers and other tools with wedge edge. Correction processing is to use these tools to make compression spring local plastic deformation to achieve the required size of the design

Friendship link:china spring manufacturer
Copyright 2018 Yipin Metal (D.G.) Co., Ltd Copyright ICP备案号:粤ICP备14054934号-1